Eutech Systems


Flow Testers




Item Code : PROVASETT3F

This category includes the equipment for the testing of products that must assure a predetermined flow rate. The test is performed using instruments with massive flow sensors. Reckoned amid one of the distinguished organizations, we are affianced in providing a world class assortment of Flow Tester, PROVASET T3F. Developed and manufactured at par with the norms and quality standards lay down by the market, these provided testers are available with us in varied specifications and altered options. Along with this, for their consistency and high functionality, these are highly acclaimed.

Features :

  • Direct flow measurement
  • PLC interface
  • RS485 and USB serial lines
  • Reliable
  • Customizable fullscale range and resolution
  • Low maintenance
  • Longer life


Provaset T3F is an electropneumatic instrument designed for open-air flow tests at programmed pressure, controlled by an electronic pressure regulator. Provaset T3F can be managed manually by an operator or automatically, via PLC with digital inputs and outputs or remotely via a PC with serial interface. This model is suitable for use in all industrial segments, on testing benches, production lines or fully automated systems.

Provaset T3F instruments are designed for quick tests, by measuring the flow rate of air through the product being tested at a well-defined pressure; models with a bypass circuit are available for a quicker filling of the product being tested.

The pressure drop due to air flowing in the piping and connections to the component being tested can be compensated by reading pressure directly on the component being tested, with a separate connection independent from the passing flow.

Main features of PROVASET T3F are :

  • Flow measurements with mass sensor (mass flow)
  • Full scale from 50 cm3/min to 300 l/min
  • Resolution from 0.01 cm3/min to 0.1 l/min
  • Test pressure: 1 bar - 10 bar, electronic regulation
  • Pressure measurement: 1 Pa - 10 Pa resolution
  • Automatic compensation of measured flow to test pressure
  • Quick testing for filters, valves, taps, passage holes, discharge manifolds...
  • Safety valve testing with measurement of peak opening and sealing pressures
  • 50 test tables
  • Serial Line RS485/USB for connected to PC, PLC o HMI
  • Virtual Instrument (driver) for National Instrument LabView available

Specifications

Usage Flow and Pressure tester
Power 2-4 Hp
Display Type Digital
Grade Automatic
Voltage 220 V
Frequency 50 Hz